ASW5000-S

Product serial number：

Category：

The new ASW single phase inverter generation combines all aspects of our beliefs into simple, reliable and affordable PV inverters. Thanks to our compact and no lid-opening installation design, our new ASW inverter generation is simpler and faster to install. Furthermore, with our brand new WIFI-Stick and App, data monitoring and analysis becomes easy and fun.

Introduction

The new ASW single phase inverter generation combines all aspects of our beliefs into simple, reliable and affordable PV inverters. Thanks to our compact and no lid-opening installation design, our new ASW inverter generation is simpler and faster to install. Furthermore, with our brand new WIFI-Stick and App, data monitoring and analysis becomes easy and fun.

Features

• Supports up to 150% DC/AC ratio

• Fast installation with no lid opening necessary

• Dual MPPT for flexible installation

• Small and light thanks to compact design

• IP65 for outdoor use



1

Parameters

产品介绍

Input (DC)

Max PV array power	7500 Wp STC
Max input voltage	580 V
MPP voltage range / rated input voltage	80 - 550 V / 360 V
Min input voltage	80 V
Initial feed-in voltage	100 V
Max operating input current	12 A / 12 A
Max short circuit current	18 A / 18 A
Number of independent MPPT inputs /strings per MPPT input	2 / 1

Output (AC)

Rated power	5000 W
Max apparent AC power	5000 VA
AC nominal voltage	220 V / 230 V / 240 V
AC voltage range	180 - 290 V
AC grid frequency / range	50 Hz / 45 Hz to 55 Hz 60 Hz / 55 Hz to 65 Hz
Rated grid frequency / rated grid voltage	50 Hz / 230 V
Max output current	22.7 A
Power factor at rated power	1
Adjustable displacement power factor	0.8 overexcited to 0.8 underexcited
Feed-in phases	1
Harmonic distortion (THD) at rated output	< 3 %

Efficiency

Max efficiency / European efficiency

97.85 % / 97.6 %

Protective devices

Input-side disconnection device	●
Ground fault monitoring / grid monitoring	● / ●
DC reverse polarity protection / AC short circuit current capability	● / ●
All-pole-sensitive residual-current monitoring unit	●
Protection class (according to IEC 62109-1)/overvoltage category (according to IEC 62109-1)	I / AC : III ; DC : II

General data

Dimensions (W / H / D)	376 / 355 / 145 mm
Weight	12 kg
Operating temperature range	-25 ℃ to +60 ℃
Noise emission (typical)	< 25 dB(A)
Self-consumption (at night)	< 1 W
Topology	Transformerless
Cooling concept	Convection
Degree of protection (according to IEC 60529)	IP65
Climatic category (according to IEC 60721-3-4)	4K4H
Max permissible value for relative humidity (non-condensing)	100%
Max operating altitude	3000 m

Features

DC connection	SUNCLIX（Phoenix Contact）
AC connection	Plug-in Connector
Mounting type	Wall mounting bracket
LED Indicators (Status / Fault / Communication)	●
Communication interface^{1) & 2)}	WiFi / RS485 (Option)
Certificates and approvals(more available on request)	CE, IEC62109, IEC61000, AS/NZS 4777, EN50549, VFR 2014 & UTE C15-712-1, CEI 0-21, C10/C11, NBR16149, IEC61727, IEC62116, IEC61683

● standard features ○ optional features - not available

Data at nominal conditions. All information is subject to change. Version:August 2020

1) Zero export installations supported with 2-pin RS485 for connection to approved smart meters

2) DRED supported with RS485 communication for Australia & New Zealand


Residential Solutions

Datasheet_single_phase_inverters_ASW3000-S_5000-S_EN.pdf

Size:

2019-09-17 18:34:28

Download
User_Manual__ASW3000S-5000S_EN_2020.2.171583226400879.pdf

Size:

2020-03-03 17:07:04

Download